Hammer keder is made especially for those cases where a sewing
machine is not available and stitching to the textile cloth is not
possible. Size 7 (max thickness) x 12.4 mm (height) in 100m rolls
In particular, on very large printed canvases; for example, 20
metres long, 3 metres high, often three sides will be made up with PVC
cord and the hammer keder will be used on the fourth, short side. The
cloth is tightened, and the hammer keder hammered in. By hitting the PVC
cord and the cloth into the profile, the cloth tightens up nicely over
the textile frame. The excess cloth is then cut off.
The hammer keder is
available in clear and aluminium look.